The preferred system requirements for TransMagic are:
For Standalone Installations:
- Recommended System
- Windows 10 or Windows 11 Pro (64-bit)
- 2 GB Graphics Card with Open GL or Direct3D acceleration
- 16 GB RAM
- Note: In general, as translation is such a memory intensive process, we recommend that you set your RAM requirement based on the model sizes you will be translating. We call this the 10/4 rule. RAM = 10x model size during translation and 4x model size after translating. This means that if you are translating a 50 MB file, you will want 500 MB during translation -not including any other running applications and 200 MB after translation.
- 700 MB Free Hard Drive Space for TransMagic
- SSD Drives do increase read / write functions for files
- Minimum System Requirements
- Windows 10 or 11 (64-bit)
- Pentium II
- Video Card (Any on-board video card)
- 4 GB RAM
- Note: In general, as translation is such a memory intensive process, we recommend that you set your RAM requirement based on the model sizes you will be translating. We call this the 10/4 rule. RAM = 10x model size during translation and 4x model size after translating. This means that if you are translating a 50 MB file, you will want 500 MB during translation -not including any other running applications and 200 MB after translation.
- 700 MB Free Hard Drive Space for TransMagic
Keep in mind that lesser hardware will impact on how fast the CAD Model will process.